INCH-POUND
MIL-DTL-46540C(AR)
3 MAY 2006________
SUPERSEDING
MIL-C-46540B(AR)
14 June 1976
DETAIL SPECIFICATION
CASE, CARTRIDGE: 20MM, M103
Reactivated after 3 May 2006 and may be used for new and existing designs and acquisitions.
This specification is approved for use by the US Army Armament Munitions and Chemical Command,
and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the Case, Cartridge: 20MM, M103 for use with 20
millimeter ammunition (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-A-70625
-
Automated Acceptance Inspection Equipment
Design, Testing and Approval, of
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1916
-
DOD Preferred Methods for Acceptance of
Product
MIL-STD-651
-
Visual Inspection Standards for 20MM
Ammunition and Components
MIL-STD-1168
-
Ammunition Lot Numbering and Ammunition
Data Card
Comments, suggestions, or questions on this document should be addressed to: Commander, U.S. Army
ARDEC, ATTN: AMSRD-AAR-AIS-SS, Picatinny, New Jersey 07806-5000, or ardec-stdzn@pica.army.mil.
Since contact information can change, you may want to verify the currency of this address information using the
ASSIST online database at https://assist.daps.dla.mil.
AMSC N/A
FSC: 1305
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business