INCH-POUND
MIL-PRF-70600B(AR)
26 November 2012
SUPERSEDING
MIL-PRF-70600A(AR)
19 October 1998
PERFORMANCE SPECIFICATION
CARTRIDGE, RIMFIRE, .22 CALIBER
Reactivated after 26 November 2012 and may be used for new and existing designs and acquisitions.
This specification is approved for use by the U.S. Army Armament Research, Development and
Engineering Center, and is available for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers .22 caliber cartridges for use in .22 caliber weapons
(see 6.1).
1.2 Classification. The following items are covered by this specification:
Type I - Cartridge, Caliber .22, Standard Velocity for Rifle
Type II - Cartridge, Caliber .22, High Velocity for Rifle
Type III - Cartridge, Caliber .22, Match Grade for Rifle
Type IV - Cartridge, Caliber .22, Match Grade for Pistol
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or
not they are listed.
Comments, suggestions, or questions on this document should be addressed to:
Commander, U.S. Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New
Jersey 07806-5000 or e-mailed to ardecstdzn@conus.army.mil. Since contact
information can change, you may want to verify the currency of this information using
ASSIST Online database at https://assist.dla.mil/.
AMSC N/A
FSC 1305
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business