INCH-POUND
MIL-PRF-70775B (AR)
1 June 2006
SUPERSEDING
MIL-C-70775A
15 February 1994
PERFORMANCE SPECIFICATION
CARTRIDGE, 25MM: TARGET PRACTICE, DISCARDING SABOT WITH TRACE (TPDS-T), M910
Reactivated after 1 June 2006 and may be used for new and existing designs and acquisitions
This specification is approved for use by the U.S. Army Armament Research, Development and
Engineering Center (ARDEC) and is available for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification describes the performance requirements and verification procedures
for the CARTRIDGE, 25MM: target practice, discarding sabot with trace (TPDS-T), M910 (see 6.1).
1.2 Army-type designator. The Army-type designator (M910) referenced in this specification is of
Army origin and does not reflect a particular design (see 6.15).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract (see 6.2).
INTERNATIONAL STANDARDIZATION AGREEMENTS
AOP-7
Manual of Data Requirements and Tests for the Qualification of
Explosive Materials for Military Use
STANAG 4382
Slow Heating, Munitions Test Procedures
FEDERAL STANDARDS
FED-STD-595/34088 Green, Lusterless (Flat)
FED-STD-595/35109 Blue, Lusterless
Comments, suggestions, or questions on this document should be addressed to: Commander, U.S. Army
ARDEC, ATTN: AMSRD-AAR-AIS-SS, Picatinny, New Jersey 07806-5000, or ardec-stdzn@pica.army.mil.
Since contact information can change, you may want to verify the currency of this address information using the
ASSIT online database at https://assist.daps.dla.mil.
AMSC N/A
FSC: 1305
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business