MIL-M-1315A
with Specification 52-0-1. The size of sample
5. PREPARATION FOR DELIVERY
for test shall consist of at least two machines
5.1 Presentation -All unpainted metal sur-
from each lot.
faces shall be coated with type P-1 preserva-
tive conforming to Specification JAN-P-116.
4.1.2 Inspection and tests, general.
The rubber grips of the linker-delinker, hand,
caliber .50, M12, shall not be coated.
4.1.2.1 Place.- Unless otherwise specified,
5.2 Packaging.
inspection and tests shall be made by a Gov-
ernment inspector at the place of manufac-
ture.
5.2.1 Machine, link-loading, caliber .30, M8.
--The machines, preserved as specified in 5.1,
shall be packaged individually in snug-fitting
4.1.2.2 Rejection.- The machines of a lot
fiberboard boxes conforming to Specification
shall be rejected when more than 5 percent
JAN-P-1 08. The machines shall be securely
of the machines or components examined vis-
padded or blocked in the box.
ually contain defects, or when any sample
fails in the functioning test.
5.2.2 Machine, linking-delinking, caliber
.50, M7.-The machines shall be packaged as
4.1.2.3 Reinspection and retests.- When re-
specified in 5.2.1.
quested by the contractor, a retest shall be
made of any lot which fails in the functioning
5.2.3 Linker-delinker, hand, caliber .50,
test, using twice the number of items in the
M12.- The linker-delinkers shall have the ex-
sample from the lot as were used in the origi-
tractor extension spring disconnected from
nal test. Failure of any sample in the retest
the extractor and the handles compressed to
shall be cause for final rejection of the. lot.
fit in the smallest possible space. The linker-
Failure of any lot because of visual defects
delinkers shall be packaged individually in
shall be cause for retest only after the con-
snug-fitting paperboard cartons conforming
tractor reinspects the lot and removes all
to Specification JAN-P-108.
defective parts. When more than 1 percent
of the machines examined are found defective
5.2.4 Attachment, delinking, caliber .30,
on the reinspection, the lot shall be subject
M8.- Attachments shall be so packaged as to
to final rejection.
prevent damage.
4.1.2.4 Visual inspection.- Each machine or
5.2.5 Spare parts. -- Spare parts shall be
attachment and spare part shall be inspected
packaged in greaseproof, waterproof bags
visually to determine completeness of design
conforming to Specification JAN-P-1 17. The
and construction including manufacture, as-
quantities to be placed in the issue and inter-
sembly, finish, workmanship, and appearance.
mediate packages shall be in accordance with
Before final acceptance the inspector shall
lists furnished by the procuring agency.
inspect the packaging, packing, and marking
to determine compliance with this specifica-
5.3 Packing.
tion.
5.3.1 For domestic shipment.- Items shall
be packed in wood-cleated-ply wood, nailed and
4.2 Functioning test. -- At least two ma-
lock-corner wood, or wire-bound wood boxes
chines from each lot shall be thoroughly
conforming to Specification NN-B-601, NN-
tested for any malfunctioning directly trace-
B-621, or NN-B-631, respectively. (Case-
able to the construction of the machine under
liner is not required.) When the contents
test.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business