MIL-P-46601B (MU)
4.4
Quality Conformance Inspection.
4.4.1 Submission of product. -The product shall be submitted in accordance
with MIL-STD-105, as applicable.
4.4.1.1 Lot.-A lot shall consist of:
a. Primers assembled by one manufacturer, in one unchanged
process, in accordance with the same drawings and drawing revisions, and
same specification and specification revision.
b. Metal parts produced by one manufacturer, in one unchanged
process, in accordance with the same drawing and drawing revisions and same
specification and specification revision.
c.
One primer composition.
4.4.1.2 Lot identification.-Each lot of primers shall be identified in
accordance with MIL-STD-1168. Each lot of packed primers shall be further
identified with National Stock Number (NSN) and in accordance with 5.1 and
5.2.
4.4.2 Examination. -One hundred percent examination shall be performed
by the contractor for all critical defects. Examination for major and
minor defects shall be performed as specified herein, Each component and
assembly found to be defective shall be rejected.
4.4.2.1 Sampling and acceptance criteria. -The sampling plans and procedures
shall be in accordance with MIL-STD-105. To determine product acceptability,
major or minor defects as listed herein may be considered collectively on a
class basis or they may be considered individually. However, where major
defects are considered collectively on a class basis, the acceptance number
for any individual defect of the class shall be limited by the assigned
Acceptable Quality Level (AQL) for individual defect associated with the
class. (see 4.4.2.2.c) (see 6.3)
4.4.2.2 AQL's.-The following AQL's are assigned to major and minor defects:
a.
Individual:
Major defects --------------------
0.25%
Minor defects --------------------
0.40%
b.
Class basis:
Major defects --------------------
1.50%
Minor defects --------------------
2.50%
c. Individual defect associated with the class basis:
Major defects -------------------- 0,40%
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business