DOD-P-63975 (AR)
1/ A primer which fails to comply with the applicable
electrical resistance requirement shall be rejected.
2/ A primer which fails to comply with the applicable minimum
dry weight requirement shall be rejected.
3/ Failure of any sample to meet the requirements of 3.8
shall be cause for rejection of the lot.
4/ If the sample average primer time plus three standard
deviations exceeds .400 millisecond or if an individual primer
time of the test sample exceeds .400 milliseconds, the lot shall
be rejected.
5/ If the sample average action time plus four standard
deviations exceeds 4 millisecond or if an individual primer time
of the test sample exceeds 4 milliseconds, the lot shall be
rejected.
6/ If a primer button is missing, a misfire occurs, or nine
or more primers show evidence of leakage, as defined in AMCR
715-505, and ORD-SIP-S314 the lot shall be rejected. If more than
three but less than nine primers show evidence of leakage, a
second sample of double the number specified by Table I shall be
tested. If in the accumulated samples, a button is missing, a
misfire occurs, or nine or more primers show evidence of leakage,
the lot shall be rejected.
7/ A cup-insulator-button assembly which fails to comply with
the insulation strength requirement shall be rejected.
9
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business