MIL-C-60813(AR)
The lot shall be rejected when function and casualty defects plus all
other firing defects exceed the acceptance number for the cumulative sample
in Table III. If the number of defects found in the first tests exceeds
the acceptance number for the first sample, but is equal to or less than the
acceptance number for the cumulative sample, a second sample, consisting of
double the quantities specified under function and casualty test, shall be
fired.If the total number of defects in the combined first and second sam-
ple exceeds the acceptance number for the cumulative sample the lot shall
be rejected. If, in testing a second sample, defects other than those for
which the second sample is being tested should occur to the extent that
they exceed the acceptance number for the cumulative sample, the lot shall
be rejected.
The bullets extracted from the cartridges in the bullet extraction test
shall be used for this test. Failure of seven or more bullets to comply
with the applicable requirement shall be cause for rejection of the lot.
If more than three but less than seven bullets fail in the first test, a
second sample consisting of double the number of bullets in the first sam-
ple shall be tested. The lot shall be rejected if in the combined first
and second sample, seven or more bullets fail to comply with the applicable
requirement.
4.3.3.2 Firing defects.- Firing defects and acceptance numbers shall be
as specified in Table III.
Table III
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business