MIL-DTL-1394G(AR)
2.2.2 Other Government documents, drawings and publications. The following other Government
documents, drawings and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract.
U.S. ARMY ARMAMENT RESEARCH, DEVELOPMENT, AND ENGINEERING
CENTER (ARDEC) PUBLICATIONS
SCATP-20
-
Ammunition Ballistic Acceptance Test Methods,
Test Procedures for 20mm Cartridges
(This publication is available from US Army ARDEC, AMSRD-AAR-QEM-F, Picatinny, NJ 07806-
5000.)
U.S. ARMY ARMAMENT RESEARCH, DEVELOPMENT, AND ENGINEERING
CENTER (ARDEC) DRAWINGS
7548057
Cup, Primer
7548058
Button, Primer
7548066
Primer, Electric, M52A3B1 Assembly
7258817
Cartridge, 20mm, Target Practice, M55A2
7548108
Cup, Support, Primer
1575AS300
Cartridge, 20mm, Target Practice, PGU-27/B
(Copies of these drawings may be requested on line at Drawing-Request@pica.army.mil or from US
Army ARDEC, AMSRD-AAR-AIS-TD, Picatinny, NJ 07806-5000.)
ARMY MATERIAL COMMAND PUBLICATIONS
ORD-SIP-S314
-
Visual Inspection Standards for Small Arms
Ammunition Primer Defects
(This publication is available from US Army ARDEC, AMSRD-AAR-QEM-F, Picatinny, NJ 07806-
5000.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document, however,
supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified, a sample shall be subjected to first article inspection in
accordance with 4.2.
3.2 Parts and Subassemblies. Materials, parts and assemblies shall comply with requirements
specified on the applicable drawings and referenced specifications.
3.3 Insulation strength. The cup-insulator-button assembly shall withstand an electrical potential
as specified on drawing 7548066.
3.4 Electrical resistance. The electrical resistance of the primer assembly (dry) shall be as
specified on drawing 7548066.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business