MIL-DTL-1394G(AR)
4.2.1 First article rejection. If any assembly, component or test specimen fails to comply with
any of the applicable requirements, the first article sample shall be rejected.
TABLE II. First article inspection
Examination or Test
Conformance Criteria
Requirement
Inspection
Defect
Paragraph
Method
Classification
Sample
Acc/Rej
Examination for defects
Cup, primer
3.2/3.10
Table IV
Table IV
0/1
125
Button, primer
0/1
125
Cup, support, primer
0/1
125
Primer, electric
0/1
2000
Insulation Strength
2000
0/1
3.3
4.4.1
Major
Electrical resistance
2000
0/1
3.4
4.4.2
Major
Pellet weight
2000
0/1
3.5
4.4.3
Critical
Electric primer sensitivity 4/
800
0/1
3.6
4.4.4
Major
Electric primer time 5/
50
0/1
3.7
4.4.5
Critical
Action time -65oF 6/
50
0/1
3.8
4.4.6
Critical
Function and casualty
1100
0/1
3.9
4.4.7
Major
See Notes after Table III
4.3 Conformance verification.
4.3.1 Conformance inspection. The sample cartridges shall be subjected to conformance
verification in accordance with Table III and Table IV.
4.3.2 Classification of characteristics. Critical, major and minor characteristics are defined in
MIL-STD-1916.
4.3.3 Inspection lot formation. Lot formation shall be in accordance with MIL-STD-1916. Lot
numbering shall be in accordance with MIL-STD-1168.
4.3.4 Conformance rejection. If any sample fails to comply with the conformance inspection
requirements, the lot shall be rejected.
4.3.5 Examinations and tests. The attribute sampling plan required for the examination for
defects in Table IV shall be in accordance with the attribute sampling plan of MIL-STD-1916, using
Verification Level IV for major characteristics and Level II for minor characteristics unless otherwise
noted. One hundred percent inspection shall be used on all critical characteristics. The lot shall be
suspended if a malfunction or casualty not covered by this specification occurs in any firing test (see 6.9).
4.3.6 Alternative conformance acceptance. Unless otherwise specified, alternate conformance
procedures may be proposed (see 6.2).
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business