MIL-P-45172F(MU)
3.9.1 Processing defects. -The projectile metal parts shall be free of
dents, deep scratches, cuts, sharp edges, burrs, metals flaws, excessive
surface roughness and other forms of substandard workmanship.
3.9.2 Cleanliness. -The projectile metal parts shall be free of all foreign
matter.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. -Unless otherwise specified in the
contract or Purchase order, the supplier is responsible for the perform-
ante of all inspection requirements as specified herein. Except as other-
wise specified in the contract or order, the supplier may use his own or
any other facilities suitable for the performance of the inspection require-
ments specified herein unless disapproved by the Government. The Government
reserves the right to perform any of the inspections set forth in the speci-
fication where such inspections are deemed necessary to assure supplies and
services conform to prescribed requirements.
4.1.1 Quality assurance terms and definitions .-Reference shall be made to
MIL-STD-109 for definition of quality assurance terms.
4.2
First article sample.
4.2.1 Initial production sample. -At the beginning of regular production a
sample shall be submitted in accordance with contract requirements and shall
consist of:
a.
Inspection:
50
Rotating band blanks
125
Noses
125
Closure discs
125
Adapters
125
Bodies, unhanded
125
Body-adapter and rotating band assemblies (uncoated)
125
Body-adapter and rotating band assemblies (painted)
3
Standard panels
b.
Firing test:
4,000 Body-adapter and rotating band assemblies (painted)
4,000 Noses
4,000 Closure discs
The sample shall be manufactured using the same materials, equipment,
processes and procedures as will be used in regular production. Identi-
fication shall be in accordance with MIL-STD-1168.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business