INCH-POUND
MIL-DTL-1318C (AR)
23 May 2007
SUPERSEDING
MIL-C-1318B (AR)
3 April 1985
DETAIL SPECIFICATION
CARTRIDGE, CALIBER .50, TRACER, M17
Inactive for new design after 12 February 1996.
This specification is approved for use by the U.S. Army Armament Research, Development and
Engineering Center (ARDEC), and is available for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements and verification methods for the
Cartridge, Caliber .50, Tracer, M17.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents in other section of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
2.2 Government documents.
Comments, suggestions, or questions on this document should be addressed to: Commander, U.S. Army
ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, New Jersey 07806-5000 or e-mailed to pica-
stdzn@pica.army.mil. Since contact information can change, you may want to verify the currency of
this information using ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1305
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business