MIL-DTL-1318C (AR)
4.5.13 Workmanship. Visually verify that all parts and assemblies meet
requirements of 3.15.
4.5.14 Ammunition lot numbering. Visually verify that an ammunition lot number
has been applied to each lot as described in MIL-STD-1168.
4.5.15 Mixed ammunition. Immediately prior to the packaging operation, 100
percent examination of the cartridges shall be performed to ascertain that the cartridge
type conforms to the drawing. Occurrence of a high pressure test, dummy, blank, grenade
trace or overhead fire trace cartridges shall be classed as a critical defect. Occurrence of
any other incorrect type shall be classed a major defect. All non-conforming cartridges
shall be rejected.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as
specified in the contract or order (see 6.2). When packaging of materiel is to be
performed by DOD or in-house contractor personnel, these personnel need to contact the
responsible packaging activity to ascertain packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging activities within
the Military Service or Defense Agency, or within the military service's system
commands. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful,
but is not mandatory.)
6.1 Intended use. The cartridges covered by this specification are intended for
use in Caliber .50 weapons. The M17 is a military unique cartridge.
6.2 Acquisition requirements. Acquisition documents must specify the
following:
a. Title, number and date of this specification.
b. Type and level of packing for the cartridges.
c. Provisions for the submission of Inspection Equipment Designs (see 6.3)
d. Provisions for the submission of acceptance inspection reports containing
final inspection results for each lot of ammunition presented to the
Government (see 6.4).
17
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business