MIL-DTL-1318C (AR)
e. Requirements for submission of first article sample (see 3.1).
f. Applicable national stock number.
g. Packaging requirements. See section 5.1 and applicable contract requirements.
Packaging can be done in accordance with reference packaging drawing
12576456.
h. Contractor acceptance inspection equipment (AIE). Provision concerning the
contractor's AIE used to verify the requirements of this specification should be
specified in the contract.
6.3 Submission of inspection equipment designs for approval. (See MIL-A-
48078). Submit inspection equipment designs as required to Commander, ARDEC,
ATTN: AMSRD-QEM-D, Picatinny Arsenal, NJ 07806-5001.
6.4 Submission of test data. In addition to the normal distribution of records,
when the cartridge is procured by the US ARDC, one (1) copy of all ballistic data and the
ammunition data card for each lot should be forwarded to: Commander, ARDEC, ATTN:
AMSRD-QEM-D, Picatinny Arsenal, NJ 07806-5001.
6.5 Hazard notice. The cartridge described herein and some of its components are
flammable and explosive and consequently present hazards in manufacture, handling,
storage and shipment. The contractor should recognize these hazards and take appropriate
measures to prevent fire, explosion, adverse environment, rough handling, corrosive
atmosphere, and electrically induced incidents. Such measures should include the
employment of an effective safety program that addresses the inherent hazards associated
with the cartridge.
6.6 Drawings. Drawings listed in Section 2 of this specification under the heading
US Army Armament Research, Development, and Engineering Center (ARDEC) may
also include drawings prepared by, and identified as Edgewood Arsenal, Frankford
Arsenal, Rock Island Arsenal, US Army Armament Research, Development, and
Engineering Command (ARRADECOM) or Picatinny Arsenal drawings. Technical data
originally prepared by these activities is now under the cognizance of ARDEC.
6.7 Submission of alternative conformance provisions. All contractor proposed
alternative conformance provisions will be submitted to the Government for
evaluation/approval as directed by the contracting activity.
6.8 Ammunition lot numbers. Ammunition lot numbers requires ammunition
data cards in accordance with MIL-STD-1168B.
6.9 Classification of characteristics. For examinations and tests cited herein or
when required by contract; critical, major, and minor characteristics are defined in
Section 3 of MIL-STD-1916.
18
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business