MIL-DTL-1318C (AR)
TABLE IV. Conformance tests - Continued
DRAWING NUMBER
CARTRIDGE, CALIBER .50, TRACER, M17
7672165
CONFORMANCE
CRITERIA
REQUIREMENT
INSPECTION METHOD
EXAMINATION OR TEST
PARAGRAPH
REFERENCE
QTY
Ac
Re
Notes - Continued:
4/. The lot shall be rejected when function and casualty defects plus firing defects
observed in all other firing tests exceed the acceptance number for the cumulative sample
in Table IV. If the number of defects found in the first tests exceeds the acceptance
number for the first sample, but is equal to or less than the acceptance number for the
cumulative sample, a second sample consisting of double the quantities specified under
function and casualty shall be fired in the service weapons in which the firing defects
occurred in the first test. If the total number of defects in the combined first and second
sample exceeds the acceptance number for the cumulative sample, the lot shall be
rejected. If, in testing a second sample, defects other than those for which the second
sample is being tested should occur to the extent that they exceed the acceptance number
for the cumulative sample, the lot shall be rejected.
5/ The bullets extracted from the cartridges in the bullet extraction test shall be used for
this test. Failure of seven or more bullets to comply with the applicable requirement shall
be cause for rejection of the lot. If more than three but less than seven bullets fail in the
first, a second sample consisting of double the number of bullets in the first sample shall
be tested. The lot shall be rejected if, in the combined first and second sample, seven or
more bullets fail to comply with the applicable requirements.
6/ Failure of thirty one or more cartridges to comply with the applicable requirements
shall be cause for rejection of the lot. If more than ten but less than thirty-one cartridges
fail in the first test, a second sample consisting of double the number of cartridges in the
first sample shall be tested. The lot shall be rejected if the combined first and second
sample, thirty-one or more cartridges fail to comply with the applicable requirements.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business