MIL-P-50601A(MU)
4.5.8 Paint adhesion. -The method of test shall be as specified in TT-C-
490. The test shall be made on the painted bourrelet of each unit of the
sample.
4.5.9 Corrosion resistance. -The method of test shall be as specified in
American Society for Testing Materials (ASTM), ASTM B117. The paint shall
not be disturbed, however, the rotating band and unpainted surfaces of the
sample assemblies may be masked out by a wax coating or other suitable
material. The salt spray solution and exposure time shall be as specified
in 3.8.3.
4.5.10 Metal parts security. -The method of test will be as specified in
AMCR 715-505, Volume 8, as applicable. The sample assemblies will be loaded
and assembled as specified on Dwg. D10542655, Cartridge, 20mm, for projectile
metal parts test. The test cartridge, at ambient temperature, will be fired
in bursts of twenty-five shots in the M139 Gun. The gun barrel will be at
ambient temperature for the firing of each burst. The cyclic rate of fire
will be recorded for informational purposes.
PREPARATION FOR DELIVERY
5.
5.1 Packing, Level C.-Each lot of projectile metal parts assemblies shall
be packed as specified by Dwg. D11731531.
5.2 Marking .-Marking of shipping containers shall comply with Dwg.
D11731531 and with the applicable requirements of MIL-STD-1169.
NOTES
6.
6.1 Intended use. -These projectiles are intended for use with the M204 type
cartridge case in the assembly of target practice cartridges with tracer.
6.2 Ordering data.-Procurement documents should specify the following:
6.2.1 Title, number and date of this specification.
6.2.2 Place of inspection, if not at place of manufacture.
6.2.3 First article sample requirements (see 3.3, 4.3 and 6.2).
6.2.4 Packing and marking instructions (see 5.1 and 5.2).
6.2.5 Provisions for shipment and testing of first article and production
lot samples.
6.2.6 Provision for the supply, maintenance and disposition of Government
furnished inspection equipment for acceptance inspection purposes.
6.2.7 Provision for the submission and approval of the manufacturing process.
(see 3.4)
13
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business