MIL-DTL-46610F
4.3.2 Inspection to be performed. The first article inspection shall be performed in
accordance with Table VII.
4.3.3 First article rejection. If any item of the sample fails to comply with all first article
requirements, the first article shall be rejected.
TABLE VI. First article verification quantities
Part description
Quantity
Completed primer
3,500
Anvil
3,500
Cup
3,500
TABLE VII. First article inspection
Part
Inspection method
Anvil
A sample of 320 shall be selected from the sample of 3,500
anvils and inspected for all dimensions on the drawing that are
not listed as advisory.
Cup
A sample of 320 shall be selected from the sample of 3,500
cups inspected for all dimensions on the drawing that are not
listed as advisory.
Completed Primer
The entire sample of 3,500 shall be subjected to all the critical
and 100% major examinations listed in 4.2.1 through 4.2.6.
Functional testing will be in accordance with Table VIII with
quantities as specified in Table VIII. A sample of 320 shall be
selected from the 3,500 primers and subjected to all the major
examinations listed in 4.4.2.1 through 4.4.2.6. A sample of 80
shall be selected from the above sample of 320 primers and
subjected to all the minor examinations listed in 4.4.2.1
through 4.4.2.6.
4.3.2 Rejection. If any assembly, component or test specimen fails to comply with any of
the applicable requirements, the first article sample shall be rejected.
4.4 Conformance Inspection.
4.4.1 Lot formation. Lot formation shall be in accordance with MIL-STD-1168. Unless
otherwise specified, component ingredients shall be homogeneous, inspected, and tested.
4.4.2 Examinations and tests.
a. Classification of characteristics. For the conformance inspection paragraphs 4.4.2.1
thru 4.4.2.8, one hundred percent examination shall be performed for all critical and major
defects listed as 100% examination. For the remaining, major and minor characteristics shall be
performed in accordance with Table II of MIL-STD-1916.
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business